Humphreys Hitch and Trailer Parts
Humphreys Hitch and Trailer Parts has been serving the towing needs of towing world for over 20 Years!
Browse our catalogs of trailer parts, tow bar and towing supplies and hitches and accessories.
Repair and installation trailers, hitches or towing equipment is available in our Service Center.

How To's And Guides






Kodiak 3.5K 5 Bolt 4.5" Bolt Circle Trailer Disc Brake

Kodiak 3.5K Trailer Disc Brake Conversion
  • L68149 Inner / L44649 Outer Bearings
  • Fits #84 Spindle (Most 3,500 lb. axles)
  • Std. Grease & Grease Lube Applications
  • Economical One-Piece Hub/Rotor Design or Slip-On Rotor Design
  • Available in Machine, E-Coat, Dacromet, Dacromet/Stainless Steel and Stainless steel Finish (Marine)
  • Disc Kit includes 2ea. Rotor of Choice, 1 pair Calipers w/pads & Brackets for one axle. (Inner/Outer Bearings, Grease Seals, Caps & Wheel Nuts sold separately).
Kodiak 3.5K Hydraulic Disc Brake 5 Bolt 4.5 Inch Bolt Circle Parts Illustration
PART # DESCRIPTION

Axle Disc Brake Kits

2/RCMHS-8-3-E Bolt-On 3.5K Kodiak One Axle Disc Brake Set 8" Rotor E-Coat 10-13" Wheels.
2/RCMHS-8-3-DAC Bolt-On 3.5K Kodiak One Axle Disc Brake Set 8" Rotor 3.5K DAC 10-13" Wheels.
2/RCMHS-8-2-E Dacromet coated caliper for 8" surge brake only
2/RCM-10-SB-DAC 3.5K Kodiak Axle 10" Surge Disc Brake Set. Fits standard 545 hub flange diameter of 6.5″ or less.
2/RCM-10 3.5K Kodiak Axle Disc Brake Set 10" Slip-On Rotor Auto Finish (1 Axle)
2/RCM-10-E 3.5K Kodiak Axle Disc Brake Set 10" Slip-On Rotor E-Coat (1 Axle)
2/RCM-10-DAC 3.5K Kodiak Axle Disc Brake Set 10" Slip-On Rotor DAC (1 Axle)
2/RCM-10-DAC-KG 3.5K Kodiak Axle Set Contains 2 Rotor-10-DAC (Dacromet Coated) 2 DBC-225-KG (KodaGuard Coated Calipers – Loaded) 2 CMB-10-U-DAC (Dacromet Coated)
2/RCM-10-DAC-SS 3.5K Kodiak Axle Disc Brake Set 10" Slip-On Rotor DAC/SS (1 Axle)
2/RCM-10-SS 3.5K Kodiak Axle Disc Brake Set 10" Slip-On Rotor All SS (1 Axle)
2/RCMH-10-3XL 3.5K Kodiak Axle Set Contains 2 ROTOR-10-3XL – 10″ rotor (fits 545 idler hub); 3.19″ pilot DBC-225-E – Loaded E-coated caliper for 10″ rotor CMB-10-3XL-E – E-coated caliper mounting bracket for 10″ rotor; hub 3.5XL (universal) HUB-3.5XL – 545 hub; 3.19″ Pilot; 35mm sealed bearing retrofits to Dexter 3.5k Nev-R-Lube spindle. Use zero offset wheels.
2/HRCM-10 3.5K Axle Disc Brake set 10" Integral Rotor/Hub Auto Finish (1 Axle)
2/HRCM-10-E 3.5K Kodiak Axle Disk Brake Set 10" Integral Rotor/Hub E-Coat (1 Axle)
2/HRCM-10-DAC 3.5K Kodiak Axle Disc Brake Set 10" Integral Rotor/Hub DAC (1 Axle)
2/HRCM-10-DAC-KG 3.5K Kodiak Axle Set Contains 2 Rotor/Hub-10-DAC (Dacromet Coated) 2 DBC-225-KG (KodaGuard Coated Calipers) 2 CMB-10-U-DAC (Dacromet Coated Brackets).
2/HRCM-10-DAC-SS 3.5K Kodiak Axle Brake Set 10" Integral Rotor/Hub SS / DAC (1 Axle)
1/HRCM-10-E-KIT End Assembly Contains ROTOR/HUB-10-E – 10″ E-coated integral hub/rotor with 545 bolt pattern; fits #84 spindle; includes seals, lug nuts bearings and grease cap DBC-225-E – Loaded E-coated caliper for 10″ rotor CMB-10I-E – E-coated caliper mounting bracket for 10″ integral hub/rotor —includes seals, lug nuts bearings and grease cap.
1/HRCM-10-DAC-KIT End Assembly Contains ROTOR/HUB-10-DAC – 10″ dacromet coated integral hub/rotor with 545 bolt pattern; fits #84 spindle; includes seals, lug nuts bearings and grease cap DBC-225-DAC – Loaded dacromet coated caliper for 10″ rotor CMB-10-I-DAC Dacromet coated caliper mounting bracket for 10” Integral hub/rotor —includes seals, lug nuts bearings and grease cap.
1/HRCM-10-DAC-SS-KIT End Assembly Contains ROTOR/HUB-10-DAC – 10″ dacromet coated integral hub/rotor with 545 bolt pattern; fits #84 spindle; includes seals, lug nuts bearings and grease cap DBC-225-SS – Loaded dacromet coated caliper for 10″ rotor CMB-10I-DAC – Dacromet caliper mounting bracket for 10″ integral hub/rotor —includes seals, lug nuts bearings and grease cap.
1/RCMH-10-SS-KIT End Assembly Contains 10" stainless steel rotor with 545 bolt pattern; fits #84 spindle; Loaded stainless steel caliper for 10" rotor; Stainless steel caliper mounting bracket for 10" rotor (universal); Galvanized Hub; 545 bolt pattern w/ 2" Wheel Stud and Cupped; fits #84 spindle; includes seal, lug nuts bearings and grease cap.

3500 LB. AXLE 8" - REPLACEMENT PARTS

ROTOR-8-3-E 8" E-coated rotor (bolts to Hub/Spacer 84-E)
ROTOR-8-3-DAC 8" dacromet coated rotor (bolts to Hub/Spacer 84-E)
DBC-225-SB-E E-coated loaded caliper for surge brake only
DBC-225-SB-DAC Dacromet coated lever actuated mechanical parking brake caliper; ceramic pads
CMB-8-3B-E E-coated caliper mounting bracket for 8" rotor, bolt on; #84 spindle
CMB-8-3B-DAC Dacromet coated caliper mounting bracket for 8" rotor, bolt on; #84 spindle
DBC-225-CERM-PAD Ceramic Friction Pads standard on 10" brake with coated caliper.
DBC-225-CERM-PAD-SS Ceramic Friction Pads (with stainless steel backing plate) standard on 10" brake with stainless steel caliper.
HUB/SPACER-84-E E-coated hub/spacer; 545 bolt pattern; 1/2" wheel bolts; fits #84 spindle
HUB/SPACER-84-DAC Dacromet coated hub/spacer; 545 bolt pattern; 1/2" wheel bolts; fits #84 spindle
HUB/SPACER-84-BOLT 3/8-16x3/4 low head socket cap screw rotor mounting bolt
DBC-225-PISTON-SS 2 1/4" Stainless Steel Piston a Kodiak Standard & Exclusive.
DBC-225-SEAL EPDM Piston Seal #4986
DBC-225-BOOT-SS EPDM Dust Boot #4985
DBC-FIF-MP-90 Adapter Port 90 degree 1/8" NPT to 3/16" FIF
DBC-NPT-ADP/BBS-ASSY Brass Bleed Port (1/4"-28 Bleed Screw with 1/8" NPT Adapter
DBC-NPT-PLUG 1/8" Brass Pipe Thread Plug
DBC-MHBS Stainless Steel Guide Bolt Sleeve
DBC-MHGB Stainless steel guide bolt (M11 x 1.5) with Thread Locker (5/1" Allen or 1/2" Hex)
DBC-MHBSB EPDM Bushing For Guide Bolt Sleeve
DBC-MB O-ring for Guide Bolt Sleeve (Use For OLDER Design)
DBC-225-KIT Disc Brake Caliper Rebuild Kit- includes 1 boot, 2 bushings, 2 guide bolts, 1 seal and 1 stainless steel piston

3500 LB. AXLE 10" SURGE BRAKE SETS - REPLACEMENT PARTS

ROTOR-10SB-DAC 10" Dacromet coated surge brake rotor. Fits standard 545 hub flange.
DBC-204SB-DAC Loaded dacromet coated caliper for 10" rotor; ceramic pads
DBC-204SB-DAC Dacromet coated mounting bracket for ROTOR-10SB only
DBC-204-CERM-PAD Friction Pads (ceramic standard on 204SB caliper)
DBC-204-PISTON-KG 2.04" KodaGuard® coated piston; standard in 204SB caliper
DBC-204-SEAL EPDM piston seal for 2.04" piston
DBC-204-BOOT EPDM Dust Boot
DBC-204-MHSB Shoulder bolt
DBC-204-MHSBB Shoulder bolt bushing
DBC-FIF-MP-90 Adapter Port 90 degree 1/8" NPT to 3/16" FIF
DBC-NPT-ADP/BBS-ASSY Brass Bleed Port (1/4"-28 Bleed Screw with 1/8" NPT Adapter
DBC-NPT-PLUG 1/8" Brass Pipe Thread Plug

3500 LB. AXLE 10" BRAKE SETS - REPLACEMENT PARTS

ROTOR-10 10" rotor standard automotive finish (fits 545 idler hub)
ROTOR-10-DAC 10" Dacromet coated rotor(fits 5 on 4.5 idler hub)
ROTOR-10SB-DAC 10" dacromet coated rotor (fits 545 idler hub and 204 SB caliper only)
ROTOR-10-E 10" E-coated rotor(fits 5 on 4.5 idler hub).
ROTOR-10-SS 10" stainless steel rotor(fits 5 on 4.5 idler hub)
ROTOR/HUB-10 10" rotor/hub standard automotive finish. Fits 5 on 4.5 wheel bolt pattern. 1/2" wheel bolts. L44610 and L68111 bearing cups installed. Fits #84 spindle
ROTOR/HUB-10-DAC 10" rotor/hub Dacromet coated. Fits 5 on 4.5 wheel bolt pattern. 1/2" wheel bolts. L68111 and L44610 bearing cups installed. Fits #84 spindle
ROTOR/HUB-10-E 10" rotor/hub with E-coat finish. Fits 5 on 4.5 wheel bolt pattern. 1/2" wheel bolts. L68111 and L44610 bearing cups installed. Fits #84 spindle
DBC-204SB-DAC Dacromet coated mounting bracket for ROTOR-10SB only
DBC-225-DAC Disc brake caliper (Dacromet coated). Fits 3500-6000 lb axles. Loaded standard with ceramic friction pads with guide bolts.
DBC-225-DAC-BPSS Loaded dacromet coated caliper for 10" rotor; ceramic pads with stainless steel backing plates
DBC-225-E Disc brake caliper E-Coat. Fits 3500-6000 lb axles. Loaded standard with ceramic friction pads with guide bolts. Semi-metallic available upon request.
DBC-225-KG Loaded KodaGuard® coated caliper for 10" rotor; ceramic pads with stainless steel backing plates
DBC-225-SS Disc brake caliper stainless steel. Fits 3500-6000 lb axles. Loaded standard with stainless steel backed ceramic friction brake pads with guide bolts.
DBC-225-PB-DAC Dacromet coated lever actuated mechanical parking brake caliper; ceramic pads
CMB-10-U-E Caliper mounting bracket, E-coat, For 10" Rotor, Universal fit.
CMB-10-U-DAC Caliper mounting bracket, Dacromet coated, for 10" Rotor, Universal fit.
CMB-10-U-SS Caliper mounting bracket, Stainless steel, for 10" Rotor, Universal fit.
CMB-10I-E Caliper mounting bracket, E-coat, For 10" Rotor/Hub(INTEGRAL).
CMB-10I-DAC Caliper mounting bracket, Dacromet coated, for 10" Rotor/Hub(INTEGRAL).
CMB-10SB-DAC Dacromet coated mounting bracket for ROTOR-10SB only
CMB-10-3XL-E E-coated caliper mounting bracket for 10" rotor; hub 3.5XL and mechanical parking brake
DBC-225-CERM-PAD Ceramic Friction Pads standard on 10" brake with coated caliper.
DBC-225-CERM-PAD-SS Ceramic Friction Pads (with stainless steel backing plate) standard on 10" brake with stainless steel caliper.
DBC-204-CERM-PAD Friction Pads (ceramic standard on 204SB caliper)
ROTOR/HUB-LB169 1/2 X 1.69" Drive In Zinc (Kodiak) Wheel Studs
ROTOR/HUB-LUG NUT 1/2"-20 60 degree grade 5 lug nut.
ROTOR/HUB-10-INBEA Inner bearing for ROTOR/HUB-10 # L68149
ROTOR/HUB-10-OTBEA Outer bearing for ROTOR/HUB-10 # L44649
ROTOR/HUB-10-SEAL #171255TB N double lip seal for ROTOR/HUB-10
NPN-L68111-INNER Inner race for ROTOR/HUB-10 #L68111
NPN-L44610-OUTER Outer race for ROTOR/HUB-10 #L44610
ALN-1375-SS Outer race for ROTOR/HUB-10 #L44610
DBC-204-PISTON-KG 2.04" KodaGuard® coated piston; standard in 204SB caliper
DBC-204-SEAL EPDM piston seal for 2.04" piston
DBC-204-BOOT EPDM Dust Boot
DBC-204-MHSB Shoulder bolt
DBC-204-MHSBB Shoulder bolt bushing
DBC-225-PISTON-SS 2 1/4" Stainless Steel Piston a Kodiak Standard & Exclusive.
DBC-225-SEAL EPDM Piston Seal #4986
DBC-225-BOOT-SS EPDM Dust Boot #4985
DBC-FIF-MP-90 Adapter Port 90 degree 1/8" NPT to 3/16" FIF
DBC-NPT-ADP/BBS-ASSY Brass Bleed Port (1/4"-28 Bleed Screw with 1/8" NPT Adapter
DBC-NPT-PLUG 1/8" Brass Pipe Thread Plug
DBC-MHBS Stainless Steel Guide Bolt Sleeve
DBC-MHGB Stainless steel guide bolt (M11 x 1.5) with Thread Locker (5/1" Allen or 1/2" Hex)
DBC-MHBSB EPDM Bushing For Guide Bolt Sleeve
DBC-MB O-ring for Guide Bolt Sleeve (Use For OLDER Design)
DBC-225-KIT Disc Brake Caliper Rebuild Kit- includes 1 boot, 2 bushings, 2 guide bolts, 1 seal and 1 stainless steel piston
CMB-10-LOCKNUT 7/1/2"-20X1.375" Acorn Lug Nut, 60 Degree, Stainless Steel
CMB-10-BOLT 7/16"-20 x 1 1/4" zinc NF grade 5 hex bolt for mounting bracket to b. flange
ROTOR/HUB1980-DUST CAP 7/16"-20 Zinc NF grade 5 nylon insert Locknut
Q-HUB84545-2-1GV-10" Galvanized Hub; 545 bolt pattern with 2" Wheel Stud and Cupped; fits #84 spindle
HUB-84545-SS Stainless Steel Hub, 5 on 4.5" bolt circle, cupped and studded with 1/2" wheel stud

*Note the linked reference numbers will take you to the Humphreys Trailer Parts catalog where the part can be purchased.

Parts Catalogs



Humphreys Hitch And Trailer Parts
   Copyright 2001-2015
Humphreys Hitch and Trailer Parts
All Rights Reserved
  
Humphreys Hitch And Trailer Parts